ClimateGuard 150mm Centre Double Glazed Framing System

About ClimateGuard

The ClimateGuard 150mm x 60mm centre double glazed framing system perfectly complements the Climateguard Sliding Stacking Apartment door, as well as the ClimateGuard Awning Casement Window.

This 150mm x 60mm centre double glazed framing system, utilised high-end polyamide thermal break strips to achieve superior energy ratings and comfort.

Easy to fabricate and install, it is Ideally suited for applications such as shopping centres, show rooms, high-end residential apartments and commercial buildings. It has also been tested, by an Independent NATA accredited laboratory – meets and exceeds Australian Standards AS2047.

Design Features:

  • null
    Accepts glass thickness from 24mm – 36mm
  • null
    Compatible with other Darley Aluminium Commercial Systems
  • null
    Compatible with various Darley mainframe options
  • null
    Thermally broken system for higher performance energy values
  • null
    Tested and approved by an independent NATA accredited laboratory

WERS Ratings

The Window Energy Rating Scheme (WERS) is accredited by the AFRC – which means that WERS ratings are compliant with the NCC.

Reports are prescribed both the window performance for total window U Value (Uw) and total window Solar Heat Gain Coefficient (SHGCw).

U-value

U-value measures how well a product prevents heat from escaping.

It is a measure of the rate of non-solar heat loss or gain through a material or assembly.

U-value ratings generally fall between 2.0-10.0 W/m2.K for Australian products. The lower the U-value, the greater a window’s resistance to heat and cold flow and the better its insulating value.

Solar Heat Gain Co-efficient (SHGC)

SHGC measures how well a product blocks heat caused by sunlight. SHGC is expressed as a number between 0 and 1. The lower a window’s SHGC, the less solar heat it transmits.

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Tested to AS2047

Under the Building Code of Australia, we are required to produce windows and doors that meet mandatory minimum specifications under Australian Standard (AS) 2047 – including AS1288.

Simulations of High Winds and Driving Rains

AS4420.2 Deflection Test – positive and negative wind pressures are applied to the face of the window to test the maximum deflection under wind load.
AS4420.5 Water Penetration Resistance Test – to verify that no water leaks through the window into the building.

Operating Force Requirement

AS4420.3 Operating Force Test – to verify that an opening sash is capable of opening and closing without undue effort.

Air Infiltration Pressure

AS4220.4 Air In filtration Test – the air leakage of a window is tested to ensure energy and acoustic efficiency.

Ultimate Strength Testing

AS4420.6 Ultimate Strength Test – negative and positive wind pressures are applied to the window to at least 1.5 times the design wind pressure to ensure it does not fail in unusual wind conditions.

Download CAD Drawings

Please note: file will be in .zip format.

About ClimateGuard

About ClimateGuard

The ClimateGuard 150mm x 60mm centre double glazed framing system perfectly complements the Climateguard Sliding Stacking Apartment door, as well as the ClimateGuard Awning Casement Window.

This 150mm x 60mm centre double glazed framing system, utilised high-end polyamide thermal break strips to achieve superior energy ratings and comfort.

Easy to fabricate and install, it is Ideally suited for applications such as shopping centres, show rooms, high-end residential apartments and commercial buildings. It has also been tested, by an Independent NATA accredited laboratory – meets and exceeds Australian Standards AS2047.

Design Features:

  • null
    Accepts glass thickness from 24mm – 36mm
  • null
    Compatible with other Darley Aluminium Commercial Systems
  • null
    Compatible with various Darley mainframe options
  • null
    Thermally broken system for higher performance energy values
  • null
    Tested and approved by an independent NATA accredited laboratory
Wers Ratings

WERS Ratings

The Window Energy Rating Scheme (WERS) is accredited by the AFRC – which means that WERS ratings are compliant with the NCC.

Reports are prescribed both the window performance for total window U Value (Uw) and total window Solar Heat Gain Coefficient (SHGCw).

U-value

U-value measures how well a product prevents heat from escaping.

It is a measure of the rate of non-solar heat loss or gain through a material or assembly.

U-value ratings generally fall between 2.0-10.0 W/m2.K for Australian products. The lower the U-value, the greater a window’s resistance to heat and cold flow and the better its insulating value.

Solar Heat Gain Co-efficient (SHGC)

SHGC measures how well a product blocks heat caused by sunlight. SHGC is expressed as a number between 0 and 1. The lower a window’s SHGC, the less solar heat it transmits.

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Testing

Tested to AS2047

Under the Building Code of Australia, we are required to produce windows and doors that meet mandatory minimum specifications under Australian Standard (AS) 2047 – including AS1288.

Simulations of High Winds and Driving Rains

AS4420.2 Deflection Test – positive and negative wind pressures are applied to the face of the window to test the maximum deflection under wind load.
AS4420.5 Water Penetration Resistance Test – to verify that no water leaks through the window into the building.

Operating Force Requirement

AS4420.3 Operating Force Test – to verify that an opening sash is capable of opening and closing without undue effort.

Air Infiltration Pressure

AS4220.4 Air In filtration Test – the air leakage of a window is tested to ensure energy and acoustic efficiency.

Ultimate Strength Testing

AS4420.6 Ultimate Strength Test – negative and positive wind pressures are applied to the window to at least 1.5 times the design wind pressure to ensure it does not fail in unusual wind conditions.

Technical Manuals
CAD Drawings

Download CAD Drawings

Please note: file will be in .zip format.

Windows Specifications

Technical Specifications
Standard Configurations
Standard Configurations

Residential Hardware

Find Out More

Related Products

Menu

Login