KlassicView 76mm Sliding Window

About KlassicView

The KlassicView 76mm Sliding Window has been designed to deliver high strength and performance. With an inbuilt drain flap for protection against weather and air interference, the KlassicView 76mm sliding window accepts a sash weight of up to 80kgs. It also comes with a range of interlocks to build a high-performance window.
Designed for Australian climatic conditions, the KlassicView 76mm sliding window has been tested and exceeds Australian Standard AS0247.

Design Features:

  • null
    Accepts glass thickness from 4mm to 10.38mm single glazed glass and 16 & 20mm double glazed glass.
  • null
    Mullion centre locking system
  • null
    Frame Height up to 1650mm
  • null
    Sash weight up to 80Kgs
  • null
    Slide in flyscreens with no need of any clips
  • null
    Slide in flyscreens with no need of any clips
  • null
    Slide in flyscreens with no need of any clips
  • null
    Can be attached to the Fixed window system to have lowlights or highlights or both

WERS Ratings

The Window Energy Rating Scheme (WERS) is accredited by the AFRC – which means that WERS ratings are compliant with the NCC.

Reports are prescribed both the window performance for total window U Value (Uw) and total window Solar Heat Gain Coefficient (SHGCw).

U-value

U-value measures how well a product prevents heat from escaping.

It is a measure of the rate of non-solar heat loss or gain through a material or assembly.

U-value ratings generally fall between 2.0-10.0 W/m2.K for Australian products. The lower the U-value, the greater a window’s resistance to heat and cold flow and the better its insulating value.

Solar Heat Gain Co-efficient (SHGC)

SHGC measures how well a product blocks heat caused by sunlight. SHGC is expressed as a number between 0 and 1. The lower a window’s SHGC, the less solar heat it transmits.

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Tested to AS2047

Under the Building Code of Australia, we are required to produce windows and doors that meet mandatory minimum specifications under Australian Standard (AS) 2047 – including AS1288.

Simulations of High Winds and Driving Rains

AS4420.2 Deflection Test – positive and negative wind pressures are applied to the face of the window to test the maximum deflection under wind load.
AS4420.5 Water Penetration Resistance Test – to verify that no water leaks through the window into the building.

Operating Force Requirement

AS4420.3 Operating Force Test – to verify that an opening sash is capable of opening and closing without undue effort.

Air Infiltration Pressure

AS4220.4 Air In filtration Test – the air leakage of a window is tested to ensure energy and acoustic efficiency.

Ultimate Strength Testing

AS4420.6 Ultimate Strength Test – negative and positive wind pressures are applied to the window to at least 1.5 times the design wind pressure to ensure it does not fail in unusual wind conditions.

Download CAD Drawings

Please note: file will be in .zip format.

About KlassicView

About KlassicView

The KlassicView 76mm Sliding Window has been designed to deliver high strength and performance. With an inbuilt drain flap for protection against weather and air interference, the KlassicView 76mm sliding window accepts a sash weight of up to 80kgs. It also comes with a range of interlocks to build a high-performance window.
Designed for Australian climatic conditions, the KlassicView 76mm sliding window has been tested and exceeds Australian Standard AS0247.

Design Features:

  • null
    Accepts glass thickness from 4mm to 10.38mm single glazed glass and 16 & 20mm double glazed glass.
  • null
    Mullion centre locking system
  • null
    Frame Height up to 1650mm
  • null
    Sash weight up to 80Kgs
  • null
    Slide in flyscreens with no need of any clips
  • null
    Slide in flyscreens with no need of any clips
  • null
    Slide in flyscreens with no need of any clips
  • null
    Can be attached to the Fixed window system to have lowlights or highlights or both
Wers Ratings

WERS Ratings

The Window Energy Rating Scheme (WERS) is accredited by the AFRC – which means that WERS ratings are compliant with the NCC.

Reports are prescribed both the window performance for total window U Value (Uw) and total window Solar Heat Gain Coefficient (SHGCw).

U-value

U-value measures how well a product prevents heat from escaping.

It is a measure of the rate of non-solar heat loss or gain through a material or assembly.

U-value ratings generally fall between 2.0-10.0 W/m2.K for Australian products. The lower the U-value, the greater a window’s resistance to heat and cold flow and the better its insulating value.

Solar Heat Gain Co-efficient (SHGC)

SHGC measures how well a product blocks heat caused by sunlight. SHGC is expressed as a number between 0 and 1. The lower a window’s SHGC, the less solar heat it transmits.

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Testing

Tested to AS2047

Under the Building Code of Australia, we are required to produce windows and doors that meet mandatory minimum specifications under Australian Standard (AS) 2047 – including AS1288.

Simulations of High Winds and Driving Rains

AS4420.2 Deflection Test – positive and negative wind pressures are applied to the face of the window to test the maximum deflection under wind load.
AS4420.5 Water Penetration Resistance Test – to verify that no water leaks through the window into the building.

Operating Force Requirement

AS4420.3 Operating Force Test – to verify that an opening sash is capable of opening and closing without undue effort.

Air Infiltration Pressure

AS4220.4 Air In filtration Test – the air leakage of a window is tested to ensure energy and acoustic efficiency.

Ultimate Strength Testing

AS4420.6 Ultimate Strength Test – negative and positive wind pressures are applied to the window to at least 1.5 times the design wind pressure to ensure it does not fail in unusual wind conditions.

Technical Manuals
CAD Drawings

Download CAD Drawings

Please note: file will be in .zip format.

Windows Specifications

Technical Specifications
Standard Configurations
Standard Configurations

Residential Hardware

Find Out More

Related Products

Menu

Login