KlassicView Sliding Stacking Door

About KlassicView

The KlassicView Sliding Stacking door is a high-performance door, ideal for residential and semi-commercial applications. Designed and engineered with Australian climatic conditions in mind, the Sliding Stacking door offers a range of heavy-duty interlocks for high performance.
Its outer frame contains a fly door track for the addition of a fly screen.

The entire KlassicView range has been tested and exceeds Australian Standard AS2047.

Design Features:

  • null
    Accepts glass thickness from 5mm toughened to 10.38mm single glazed glass and 16mm-20mm double glazed glass
  • null
    Frame height up to 2500mm max and 1350mm panel width max
  • null
    Sash weights up to 120kgs
  • null
    Fly Screen rack built into the frame system
  • null
    A range of heavy-duty interlocks available for high performance
  • null
    Built-in weather flap to protect against water and air penetration
  • null
    Outer frame also incorporates fly door track
  • null
    Can be coupled to other KlassicView products with use of adaptors

WERS Ratings

The Window Energy Rating Scheme (WERS) is accredited by the AFRC – which means that WERS ratings are compliant with the NCC.

Reports are prescribed both the window performance for total window U Value (Uw) and total window Solar Heat Gain Coefficient (SHGCw).

U-value

U-value measures how well a product prevents heat from escaping.

It is a measure of the rate of non-solar heat loss or gain through a material or assembly.

U-value ratings generally fall between 2.0-10.0 W/m2.K for Australian products. The lower the U-value, the greater a window’s resistance to heat and cold flow and the better its insulating value.

Solar Heat Gain Co-efficient (SHGC)

SHGC measures how well a product blocks heat caused by sunlight. SHGC is expressed as a number between 0 and 1. The lower a window’s SHGC, the less solar heat it transmits.

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Tested to AS2047

Under the Building Code of Australia, we are required to produce windows and doors that meet mandatory minimum specifications under Australian Standard (AS) 2047 – including AS1288.

Simulations of High Winds and Driving Rains

AS4420.2 Deflection Test – positive and negative wind pressures are applied to the face of the window to test the maximum deflection under wind load.
AS4420.5 Water Penetration Resistance Test – to verify that no water leaks through the window into the building.

Operating Force Requirement

AS4420.3 Operating Force Test – to verify that an opening sash is capable of opening and closing without undue effort.

Air Infiltration Pressure

AS4220.4 Air In filtration Test – the air leakage of a window is tested to ensure energy and acoustic efficiency.

Ultimate Strength Testing

AS4420.6 Ultimate Strength Test – negative and positive wind pressures are applied to the window to at least 1.5 times the design wind pressure to ensure it does not fail in unusual wind conditions.

Download CAD Drawings

Please note: file will be in .zip format.

About KlassicView

About KlassicView

The KlassicView Sliding Stacking door is a high-performance door, ideal for residential and semi-commercial applications. Designed and engineered with Australian climatic conditions in mind, the Sliding Stacking door offers a range of heavy-duty interlocks for high performance.
Its outer frame contains a fly door track for the addition of a fly screen.

The entire KlassicView range has been tested and exceeds Australian Standard AS2047.

Design Features:

  • null
    Accepts glass thickness from 5mm toughened to 10.38mm single glazed glass and 16mm-20mm double glazed glass
  • null
    Frame height up to 2500mm max and 1350mm panel width max
  • null
    Sash weights up to 120kgs
  • null
    Fly Screen rack built into the frame system
  • null
    A range of heavy-duty interlocks available for high performance
  • null
    Built-in weather flap to protect against water and air penetration
  • null
    Outer frame also incorporates fly door track
  • null
    Can be coupled to other KlassicView products with use of adaptors
Wers Ratings

WERS Ratings

The Window Energy Rating Scheme (WERS) is accredited by the AFRC – which means that WERS ratings are compliant with the NCC.

Reports are prescribed both the window performance for total window U Value (Uw) and total window Solar Heat Gain Coefficient (SHGCw).

U-value

U-value measures how well a product prevents heat from escaping.

It is a measure of the rate of non-solar heat loss or gain through a material or assembly.

U-value ratings generally fall between 2.0-10.0 W/m2.K for Australian products. The lower the U-value, the greater a window’s resistance to heat and cold flow and the better its insulating value.

Solar Heat Gain Co-efficient (SHGC)

SHGC measures how well a product blocks heat caused by sunlight. SHGC is expressed as a number between 0 and 1. The lower a window’s SHGC, the less solar heat it transmits.

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Testing

Tested to AS2047

Under the Building Code of Australia, we are required to produce windows and doors that meet mandatory minimum specifications under Australian Standard (AS) 2047 – including AS1288.

Simulations of High Winds and Driving Rains

AS4420.2 Deflection Test – positive and negative wind pressures are applied to the face of the window to test the maximum deflection under wind load.
AS4420.5 Water Penetration Resistance Test – to verify that no water leaks through the window into the building.

Operating Force Requirement

AS4420.3 Operating Force Test – to verify that an opening sash is capable of opening and closing without undue effort.

Air Infiltration Pressure

AS4220.4 Air In filtration Test – the air leakage of a window is tested to ensure energy and acoustic efficiency.

Ultimate Strength Testing

AS4420.6 Ultimate Strength Test – negative and positive wind pressures are applied to the window to at least 1.5 times the design wind pressure to ensure it does not fail in unusual wind conditions.

Technical Manuals
CAD Drawings

Download CAD Drawings

Please note: file will be in .zip format.

Windows Specifications

Technical Specifications
Standard Configurations
Technical Specifications
Product CategoryMaximum weight per panelMaximum hieightMaxiumim WidthGlass ThicknessTest Report No.Water Rating PAStuctural PAUlimate PA
KlassicView 53mm Sliding Window40kgs1,500mm1,200mmsingale glazed=10.38mm double glazed=NAAZT0223.142501,7002,100
KlassicView 76mm Sliding Window80kgs1,650mm1,350mmsingale glazed=10.38mm double glazed=20mmAZT0245.132001,8002,700
KlassicView 53mm Awning Window27kgs1,500mm1,200mmsingale glazed=10.38mm double glazed=NAAZT0027.173006001,300
KlassicView 76mm Awning Window27kgs1,650mm1,200mmsingale glazed=10.38mm double glazed=20mmAZT0028.172506001,500
KlassicView 53mm Double Hung Window21kgs2,400mm1,100mmsingale glazed=10.38mm double glazed=NAAZT0224.142001,8002,700
KlassicView 76mm Double Hung Window21kgs2,400mm1,200mmsingale glazed=NA double glazed=20mmAZT0148.132501,8002,800
KlassicView Fixed Window
KlassiC View Louvre WindowN/A2,400mm900mmTBAAZT0149.13150NA4,000
KlassicView Sliding & Stacking Door120kgs2,500mm1,350mmsingale glazed=5mm-10.38mm double glazed=20mmsliding door-AZT2586.12sliding door-200sliding door-1.350sliding door-2,000
KlassicView Hinge Doorstacking door-AZT0283.12stacking door-250stacking door-850stacking door-1,330
Standard Configurations

Residential Hardware

Find Out More

Related Products

Menu

Login